KJ Power 7 to 2500 KVA Standard or Super Silent Canopies Diesel Electric Power Generators
Standard Features:
- 4 stroke 1500RPM, water-cooled heavy-duty diesel engine
- Dry-type replaceable air filter
- Heat resistant radiator for 50 °C
- Flexible oil pipes and oil draining valve
- PreÂheater 4 poles synchronous type, single bearing, brushless alternator
- Batteries and cables
- Electrostatic paint coated, steel, welded chassis
- Fuel tank housed in the chassis Industrial type silencer
- Electronic battery charger
- Electrical wiring diagram
- User manual and operating manual
- Protection system on the manual run
- Lubrication oil and antifreeze
Optional Equipment:
- Soundproof canopy
- Automatic transfer switch
- Circuit Breaker
- Trailer
- External fuel tank
- Electronic governor
- Heating system for fuel tank
- Oil heater
- Fuel filling system (Automatic / Manual)
- Analog indicators
- 1 Phase  3 phase switch plugs
- Alarm system for fuel level
- Remote control and monitoring
- Standard and Super Silent Canopies
We use automatic surface cleaning including acid washing to clean our canopies, and all of our canopies are made of galvanized metal sheets. The painting is done by a nano technologic electrostatic powder coating technic with DIN EN ISO 9227 salt spray certificate and it is durable against rust.
By standard, KJ POWER produces canopies between 10 KVA to 2500 KVA with different canopy dimensions. Depending on the demands of customers; sound barriers inside canopies, high capacity fuel tanks (internal or external), the particular type of canopies which can be designed allowing the air out from the top or front can be manufactured.
In canopies, high levels of sound muting type of silencers are located in an isolated area to insulate heat which includes exhaust pipes and exhaust itself. On canopy walls; ISO certificated, heat and sound absorbent inflammable types of sponges are our standards. According to customers’ demands, to achieve lower sound levels, Rockwool with perforated sheet metals can be used.
Super silent canopies that have item numbers that are in the Turkish Ministry of Environment and Urbanization are produced with 10 cm thickness Rockwool on canopy walls with perforated sheet metals.
In chassis, 3 mm metal sheets are used and internal fuel tanks are standard. Double-wall or different capacities of fuel tanks can be manufactured depending on customers’ orders.
The sound level attenuation can be improved by using sound barriers at the air inlet and air outlets depending on the customer’s demands. The screws on gensets used are stainless and cannot be seen from outside of the canopy. Stainless steel hinges and locks are used on the doors of canopies.
Synchronization Systems
Synchronization systems provide advantages to the customers in various ways including reducing total investment costs, fuel-saving, making maintenance without cutting power, co-aging, and back-up is working.
KJ POWER produces the whole synchronization systems in its factory with engineers and commissioning at genset location.
Example appliances for synchronization systems can be listed as; working as back-up to each other, soft starts, unconditional sync, sync for fault back-up. KJ POWER uses well-known switches, breakers, controllers in synchronization panels.
- Control Panel Features
- Diesel and gas genset support
- Weekly Operation Schedule
- Multiple nominal conditions
- 400Hz operation support
- Dual mutual standby with equal aging of gensets
- Contactor & MCB drive
- 400 event logs full snapshot
- Manual speed fine adjust some ECU’s 4 quadrant genset power counters
- Multiple Automatic test program
- Automatic fuel pump control
- Mains power counters
- 3 level configuration password
- Disable protection feature
- Fuel filling counter
- 128×64 graphical LCD display
- Excess protection power
- Fuel consumption counter
- Downloadable language
- Reverse power protection
- Free configuration software
- Waveform display of V&I Overload
- IDMT protection Allow SMS controls
- Harmonic analysis of V&I Load shedding, dummy load
- Mobile genset support
- Synchro-scope & check synch
- Multiple load management
- Automatic GSM geoÂlocation
- 16 Amp MCB & GCB outputs
- Waveform display of V&I
- GPS connectivity (USB & RS232)
- 8 configurable digital outputs
- Battery backÂup real-time clock
- Modem & ethernet diagnostic
- Outputs expandable to 40
- Idle speed control
- Configurable through USB, RSÂ485, Ethernet and GPRS
- 4 configurable analog outputs
- All parameters front panel editable
- Ready for central monitoring Ethernet and GPRS
